What To Do If Your Garage Door Track Is Bent?

If you have a garage, your garage door is likely to be used regularly. Keeping your garage door system in good working order is essential if you use it often. Even if you take every precaution to keep your garage door system well-maintained, a single problem might bring the system to a grinding halt.

A twisted garage door track is a typical cause of a garage door that won’t open or shut correctly. Two of the most critical pieces of any garage door system are the tracks the rollers travel on, yet they’re easy to miss. Damage to your property and valuables might occur if the rollers cannot move through them properly.

Call ETS Garage Door Of Portland for same-day service if your garage door track is twisted. You may use this site to find out what to do about a bent garage door track until that time comes.

What Causes Bent Garage Door Tracks?

What Causes Bent Garage Door Tracks?

The tracks of your garage door system may be twisted in several ways. A garage door contractor should be called if any of the following occurrences have taken place or if you observe any indicators of a bent track.

• Collision

Despite the fact that it may sound absurd, many individuals accidentally drive into their garage door. This is more often than most people realize, and it may lead to bent or misaligned garage door tracks. Regardless of the cause, colliding with a garage door is more common than most people assume.

• Broken Cable or Drum

The cables and cable drums play a critical role in lifting and supporting your garage door. Your garage door tracks may bend or misalign if one breaks or malfunctions, releasing a large amount of unsupported weight onto them.

• Age

Garage door tracks, like most things, may rust or corrode with time, mainly if used often. If the tracks are damaged, they are more prone to bend or misalign themselves.

• Obstruction

Obstructions of any type might disrupt the mechanics of your garage door system. Tracks may get jammed with sand, mud, and other grit, making it difficult for the rollers and cables to move and perhaps bending the tracks somewhat.

What To Look Out For If Your Garage Door Track Is Bent Or Out Of Place?

When your garage door track is twisted or misaligned, you should be able to tell before it harms the rest of your system. Over time, you may find your garage door stiffer than it used to or does not open or shut as quickly as before. The best action is to call a garage door repair company if you feel your tracks are twisted.

Is It Possible To Use Your Garage Door If The Tracks Are Bent

Is It Possible To Use Your Garage Door If The Tracks Are Bent?

Stop using your garage door if you see that the tracks are twisted or misaligned. The damage will likely grow, and your garage door might come off its track if you continue using it. It’s advisable not to use your garage door until you have had it inspected by a professional to avoid additional damage and repair costs.

What Is The Best Way To Fix A Bent Garage Door Track?

Stop utilizing your garage door as soon as possible. If you continue to use it, you may face additional costly problems. After then, take a closer look at the issue to determine whether any parts of the system need to be changed. A ben garage door may be fixed by following these steps:

1. Take a break from your garage door until the issue is resolved. If the mechanism is forced, the door may need to be replaced entirely rather than simply a few sections.
2. Remove the screws. Bolts connect the track to the frame. If they’re too tight, you’ll be unable to make the necessary Garage Door Repairs or replacements.
3. Make careful you don’t completely remove the bolts. Replacing them is more complicated than it seems. You may tap the bolts back into place once they’ve been unfastened.
4. Make the tracks straight. A pair of pliers will come in handy for this. Take your time and be very cautious to avoid accidentally damaging them. Tighten the nuts back to their original position after completing this procedure.
5. Rebuild the rails. We know exactly how it works. Here we go: The door is ready to be reinstalled. Use a claw hammer to reshape the track in this manner.

What Is The Best Way To Fix A Bent Garage Door Track?

Bottom Line

Garage door tracks are prone to bends since they are heavy and need a lot of movement. When something is used regularly, pieces will inevitably wear out and eventually fail. Since the tracks are twisted, the garage door must be fixed as soon as possible.